Сивик 7-ма генерация код радио

[Krelion 42]

До колегите със седма генерация - имате ли представа как се въвежда кода на радиото?Другия въпрос е имате ли представа на какъв софтуер може да се включи колата за да се изчисти SRS грешка?

[iRONY 0]

Кода се въвежда от цифрите на радиото - трябва да го имаш написан на едно картонче ( при мен е в едно джобче в книжката на колата ) , а за изчистването на SRS грешките има специална тема във форума. Цък

Редактирано 2 Юни, 2009 от iRONY

[user 127]

Theft Protection

 

Standard for LX and EX models in the U.S., and LX and SPORT models in Canada. Optional for Canadian DX model.

 

Your car’s audio system will disable itself if it is disconnected from electrical power for any reason. To make it work again, the user must enter a specific five-digit code in the Preset buttons. Because there are hundreds of number combinations possible from five digits, making the system work without knowing the exact code is nearly impossible.

You should have received a card that lists your audio system’s code number and serial number. It is best to store this card in a safe place at home. In addition, you should write the audio system’s serial number in this Owner’s Manual. If you should happen to lose the card, you must obtain the code number from your Honda dealer. To do this, you will need the system’s serial number.

If your car’s battery is disconnected or goes dead, or the radio fuse is removed, the audio system will disable itself. If this happens, you will see ‘‘ ’’ in the frequency display the next time you turn on the system. Use the Preset buttons to enter the five-digit code. If it is entered correctly, the radio will start playing.

If you make a mistake entering the code, do not start over or try to correct your mistake. Complete the five-digit sequence, then enter the correct code. You have ten tries to enter the correct code. If you are unsuccessful in ten attempts, you must then leave the system on for one hour before trying again.

You will have to store your favorite stations in the Preset buttons after the system begins working. Your original settings were lost when power was disconnected.

 

Displaying Audio System’s Serial Number

 

When the audio system disables itself, you can see the eight-digit audio system serial number on the display. To display the serial number:

 

1. Turn the ignition switch to ACCESSORY (I) or ON (II).

2. Push the PWR/VOL knob to turn on the audio system while pressing the Preset 1 and 6 buttons at the same time.

3. You will see the first 4-digit number on the display for five seconds, then the next 4-digit number is shown for five seconds. You will see 8-digit serial number in total. This procedure is repeated once again.

 

After you have entered the audio system’s code number correctly, the serial number will not be displayed.